Ni opc server s7 1200
I kdy se to zdá na první pohled sloité, ukáeme si v základních krocích, jak to celé funguje a na druhý. Data z PLC Simatic S7-1200 do OPC Routeru a databáze s následným zobrazením ve vizualizaním nástroji Grafana. It may also be necessary to cycle the power on the controller. Software OPC Router, vizualizaní systém Grafana a PLC Simatic S7-1200.
#Ni opc server s7 1200 driver
(The Siemens TCP/IP Ethernet driver does not currently support the use of a password.) Check the "Permit access with Put/Get communication from remote partner" check box. Ensure that the "Full access (no protection)" radio button is selected. On the General Tab of the Properties page select Protection. Open the PLC project in the S7 TIA Portal software.
![ni opc server s7 1200 ni opc server s7 1200](https://www.xuezdh.com/doc/s71200ep/Comm/OPC/OPC_UA/images/02-10.png)
To do this perform the following steps in TIA Portal: įor TOP Server to be able to communicate, the S7-1200 and S7-1500 controller using Siemens Native Ethernet must be set to permit access from the server. The TOP Server OPC UA Client Driver, which is part of the TOP Server Siemens Plus Suite, can connect to that OPC UA interface, which provides additional capabilities that are not available via Siemens Native Ethernet. The S7-1500 PLC also supports an optional OPC UA server interface in the PLC. Older versions 5.12 and 5.13 of TOP Server support Siemens S7-1500 devices using the S7-1200 model. OPC servers provide a method for different software packages (as long as it is an OPC client) to access data from a process control device, such as a programmable logic controller (PLC) or distributed control system. Starting with Version 5.14 or newer (including the current V6 family), TOP Server added a new device model in the S7 Ethernet driver for the S7-1500. TOP Server can communicate using this Siemens Native Ethernet protocol using the TOP Server Siemens Suite S7-Ethernet driver, with some limitations described later in this tech note. This solution only can link with labview software.
![ni opc server s7 1200 ni opc server s7 1200](https://www.matrikonopc.com/images/drivers/arch_diagrams/opc_siemens_s7.jpg)
#Ni opc server s7 1200 Activator
The S7-1500 has an embedded Ethernet port which supports the S7 Communications over Ethernet protocol. NI OPC Server V2013 Keygen Name is ' NI License Activator 1.2 ' it Can Activator All V2013 version NI Software.